HAPTICORE 34-P002X2 rotary haptic actuator for applications such as home appliances, consumer electronics, or DJ & lighting equipment without mounted cover. The picture shows the black actuator with a cover adapter at the top, a thread to fasten the actuator with a nut, and its white 6-pin adapter for power supply.
HAPTICORE 34-P002X2 rotary haptic actuator for applications such as home appliances, consumer electronics, or DJ & lighting equipment without mounted cover. The picture shows the black actuator with a cover adapter at the top, a thread to fasten the actuator with a nut, and its white 6-pin adapter for power supply.
HAPTICORE 34-P002X2 rotary haptic actuator for applications such as home appliances, consumer electronics, or DJ & lighting equipment without mounted cover. The picture shows the black actuator with a cover adapter at the top, a thread to fasten the actuator with a nut, and its white 6-pin adapter for power supply.

HAPTICORE 34-P001X2

Key features

  • Typical Applications: Construction & Farming equipment, DJ & Lighting Equipment, Industrial machinery
  • Designed for 3 finger forces
  • Rotational life: 1.000.000
  • Integrated push function
  • 24,6 mm protruding encoder height

Request a Quote

Receive a custom quote for the HAPTICORE 34-P001X2 rotary haptic actuator

Technical Data

General
Diameter55 mm
Height75 mm
Protruding encoder height24,6 mm
Weight250 g
Electronics
Sensor resolution0.1°
Sensor placementIntegrated in the shaft
PCBAOnly sensor
Electrical interface – connector6 Pin Header 2.54 mm
Electrical interface – sensorI²C (400 kHz)
Rated insulation voltage – coil28 V
Supply voltage – sensor3.3 V (+2.8 V to 3.5 V)
 Minimum coil driver supply voltage 12 V for barrier / 5 V for ticks
Max. coil supply current1 A for 10 min
ESD protectionIEC61000−4−2 Level 4
Contact Discharge ±8kV
Air Discharge ±15kV
Mechanics
Mounting pointSingle mounting point
Mounting diameter @ customer interfaceø 45.4 mm incl. flat points
Push functionYes
Push actuating force 7 ± 3.5 N or 14 ± 3 N
Push travel~ 0,7 ±0,25 mm
Material
Exterior MRF chamberMetal
ShaftMetal
Push mechanismPlastic
Mounting adapterPlastic
Magnetorheological materialMagnetorheological fluid (MRF) Premium
Cover mounting mechanismPlugged or optional screwed with a M2 screw
 Recommended cover diameter
44 to 57 mm
Performance data
 Lifetime rotations1.000.000
 Lifetime push actuation2.000.000
Operating temperature range-25 °C to +85 °C
Storage & Transport temperature range
-40 °C to +85 °C
Max. barrier torque≥ 0.9 Nm at 1 A coil current
Mean base torque ≤ 50 mNm
Compliance
ROHS/REACHYes

Resources

Eval Kit Bundle – HAPTICORE 14-P001X1The image shows a HAPTICORE 14-P001X1 Eval Kit and a HAPTICORE Control Unit Pro, the main components of our Eval Kit Bundle, to test our rotary haptic feedback actuators.HAPTICORE 34-P001X1 Eval Kit. The rotary haptic actuator with a mounted cover is installed in a black metal stand to test its performance and integrate it into a prototype. The front view provides a good view of the actuator, which is mounted with a white nut in the metal stand. At the lower end of the rotary haptic actuator, you can see the shaft with the 6-pin cable adapter.Eval Kit HAPTICORE 34-P001X1